Wireless Recorder Kit Setup Guide

How To: Access Your Recordings On The WLNVR via the RXCamView App

Recordings and images will be stored here.

In the RXCamView App, press the person icon in top left corner to open menu.

Select file list.

Here you can see all images and video files recorded onto the device.

These are easily sharable through the app via your email account or even to Google Drive.

How To: Set Up Email Notifications Via The WLNVR Unit.

The device cannot directly send an email itself – you must give it permission to send from an account you have access to (this doesn’t have to be an email account you use all the time, you could set one up just for the recorder to use).

Once you have the email account set up, make note of the username and password.

Next, find out the SMTP addresses of the mail provider (in this example we will use Gmail, however the details will be different for different email providers. The easiest way to find out is to google it) and keep note of this.

Gmail SMTP server address: smtp.gmail.com

Gmail SMTP port (TLS): 587

Gmail SMTP port (SSL): 465

On the main screen of the NVR, right click to bring up the menu along the bottom.

Click the menu icon in the bottom left to bring up the small pop up menu.

Hit set-up and then Network > Email.

Tick the Email box at the top

Change encryption to SSL

Enter the SSL port number in the box below (465 for Gmail)

Enter the SMTP server next (smtp.gmail.com for Gmail)

Next enter the username and password for the account you would like to send from

Enter the name you would like the email to be from in the Sender box (e.g. CCTV Motion Alerts)

Next you can enter up to 3 addresses to receive the email notification.

Using the Interval drop down box, you can set how often these alerts are sent with continued motion alerts.

Finally, you can click through to email schedule, where you can set it to only send alerts for motion at certain days/time but also set exceptions for it to not send an email, e.g. if you know someone will be home at that time.

Wireless Recorder Kit Setup Guide

Read Next : HiSeeu Wireless Camera System installation guide

How To: Set Up The WLNVR From The Box

Initially the NVR will require a screen/monitor with a HDMI input to get it set up, however once all the settings are in place you can happily disconnect it and repower it somewhere else with a wired network connection and it will be controllable via the app!

Repeat for any other cameras – each NVR will support up to 6 cameras.

Setting Up Using The Wizard 

Network:

In most cases it will be fine to leave the network settings on default

DCHP will allow your router to automatically assign the device it’s IP address

Changing these settings is for advance networking only

Date & Time:

Set current Date and Time along with any format preferences

Here you can also set daylight savings time

HDD:

Here you can format the HDD and any SD cards inserted by selecting the small circle to the right of the memory device and then clicking format HDD.

This may take several moments

Resolution:

Here you can change the resolution to suit your monitor or screen or to lower the frame rate to save on disk space (this may lower image quality)

Mobile App:

Next you can add the device to the RXCamView App by opening the app, adding device and scanning the QR code.

Summary:

Here you can quickly review your settings before clicking finish and saving.

Remember to check the box to save the wizards settings.

How To: Pair Your Cameras To The WLNVR

Pair your cameras by pressing the small white button on the back of the main camera unit, the red lights will flash to show that it is in pairing mode.

On the screen of the recorder, hover over one of the camera channels and press the sideways camera icon in the middle at the top.

This will pair the camera to that channel on the recorder.