How to setup Sricam SriHome Products

How to setup Sricam SriHome ProductsTo protect user’s privacy, the first user is an administrator by default. Other users accessing the camera need the administrator’s authorization, or they cannot access even with camera ID and password.

1. How to share camera to other users

To protect user’s privacy, the first user is an administrator by default. Other users accessing the camera need the administrator’s

authorization, or they cannot access even with camera ID and password.

The way to get permission is as follows:

Step 1：Log in “SriHome” App, tap Settings -> Visitors Management -> Add.

There are 2 types of permissions:

Operator: Watch live video, set time,video, alarm, records and so on.

Visitor: Only watch live video

You can find the user’s App ID as figure 2-2 Menu.

Read Next :

1. How to set up Geeni smart Wi-Fi camera
2. Sricam installation and user guide

How to setup Sricam SriHome Products

Step 2: The share adds a device

After the administrator is authorized as a visitor or operator, you need to add equipment by yourself.

Note: There is no requirement for the operation sequence of step 1 and step 2. You can also operate step two first and then perform the operation of step one.

( Video guide for share user : https://youtu.be/dOkhgOBsYqY)

2. How to setup microSD  card record settings

SD card installation video：https://www.youtube.com/embed/nbpofPlUV2k

Note: Cameras maximum support 128 GB SD card.

1). Remove power cable before inserting the microSD card to the camera.

2). MicroSD card format and record setting

Log in “SriHome” App and follow the steps:Settings -> Record Setting .

There are 2 types of recordings：

24/7 recording: 24/7 recording refers to the continuous recording of the camera which is about every 10 minutes as a node continuous recording.

Alarm recording: The camera captures footage only when the motion detection alarm is activated.

The system does not detect SD Card.

Followings are a few possible reasons why this may be occurring:

1. Please power off camera before inserting SD card into camera.

2. The SD card read&write speed not good, please use a SD card with class 10 or above class 10.

4. The SD card is broken.

3. The SD card has not been formatted properly.

5. The SD card slot is malfunctioning

SD card video playback view:

Note:Both 24/7 recording and Alarm recording cannot be opened at the same time ,only one of them can be opened.

3. How to Setup Motion Detection Alarm

Step1: Enable motion detection alarm

Note: The alarm notification will be pushed just ONE time within 30 seconds

Step1-1: Tap “Setting” button >> “Settings” >> “Alarm settings” be the alarm setting window as figure 1 and figure 2.

Sensitivity: The greater the number, the higher the sensitivity, the camera will be more easily alarmed.

Step1-2: Enable “Motion Detection Alarm”as figure 2

Note: Set mobile push notification as follows

Android

iOS

4. How to watch live streams on ONVIF Clients

1.Introduction

In order to use ONVIF clients the following requirements need to be met:

►Your computer (or mobile device) and the camera access to the same LAN.

►Your camera has been successfully set up.

► rtsp://your camera IP:554/1/h264major or rtsp://your camera IP:8554/profile0

2. iSpy for Microsoft Windows

Step 1: Download the application ( http://www.ispyconnect.com/)

Step 2: Unzip the downloaded package and click the unzipped iSpySet to install.

Step 3: Open iSpy. An welcome window will pop up. Click Ok to continue.

Step 4: To add the camera go to Add > ONVIF Camera.

Step 5: In the popup window, select the “FFMPEG(H264)” ，

type in  “rtsp://your camera IP:554/1/h264major or rtsp://your camera IP:8554/profile0”, select RTSP Mode : TCP ,then click  “OK”.

Step 6: In the popup window，click“ Finish”.  

Step 7: You can watch the live steam. If you have already added more than one camera into the camera list, all the

live streams can be displayed in the same time by overlapped windows.

Step 8: offers functions (and configurations) such as alarm, FTP, SMTP, Snapshot, etc,. Play with them by clicking

right button and select Edit in the popup menu.

Locally record files

iSpy allows you to locally record videos in MP4 format.

Step 1: Press Record All button at the lower right corner. After finish recording press the Stop Record button.

Then the saved file will be displayed at the bottom of the current window. Right click the video and click the Save to

 

button to your local machine.

4. How to watch live streams on ONVIF Clients

1.Introduction

In order to use ONVIF clients the following requirements need to be met:

►Your computer (or mobile device) and the camera access to the same LAN.

►Your camera has been successfully set up.

► rtsp://your camera IP:554/1/h264major or rtsp://your camera IP:8554/profile0

2. iSpy for Microsoft Windows

Step 1: Download the application ( http://www.ispyconnect.com/)

Step 2: Unzip the downloaded package and click the unzipped iSpySet to install.

Step 3: Open iSpy. An welcome window will pop up. Click Ok to continue.

Step 4: To add the camera go to Add > ONVIF Camera.

Step 5: In the popup window, select the “FFMPEG(H264)” ，

type in  “rtsp://your camera IP:554/1/h264major or rtsp://your camera IP:8554/profile0”, select RTSP Mode : TCP ,then click  “OK”.

Step 6: In the popup window，click“ Finish”.  

Step 7: You can watch the live steam. If you have already added more than one camera into the camera list, all the

live streams can be displayed in the same time by overlapped windows.

Step 8: offers functions (and configurations) such as alarm, FTP, SMTP, Snapshot, etc,. Play with them by clicking

right button and select Edit in the popup menu.

Locally record files

iSpy allows you to locally record videos in MP4 format.

Step 1: Press Record All button at the lower right corner. After finish recording press the Stop Record button.

Then the saved file will be displayed at the bottom of the current window. Right click the video and click the Save to

 

button to your local machine.

5. How to change my camera’s password

Our camera password is saved in the camera. The SriHome app also has an account password. Don’t get confused. These

two passwords play different roles, and they work together to ensure only legislate user can access.

You can change password by tapping Settings > Security Setting.

Enter the original password of the camera,and then enter the new password.If you forget the camera password,you can press the reset button

for about 3-5 seconds to restore the camera to its factory setting(factory default password 888888)

6. How to find the user’s App ID

Tap   icon to find it. As figure 1 and figure 2.

7.How to set the privacy zone

1. Open the SriHome APP, click the settings button, and then click “Video Settings”

2. Click “▼”, select “Area 1”, and then randomly select an area on the video screen of this interface, and then click “Save”.

3. Back to the video viewing interface, you can see the privacy area just set

Note: If you need to clear the privacy area, go back to the video settings and click “Clear Current Area” or “Clear All Areas” to cancel the privacy area (a total of 4 privacy areas can be set)

7. How to change App password

Step 1. Running sriHome App, then tap “ Sign Out” as figure 1.

Step 2. Tap “Forgot password” icon as figure 2, After that, you can change App password.

9. Multiple-view on srihome App

Step 1 ：Tap the “multiple view” icon as Figure 1.

Step 2 ：On the pop up windows select the camera which you want to multiple view as figure 2.

 

Step 3 ：Tap “Next”to pop up multiple view.

Note:In multi-scree mode, you can watch up to 4 devices at the same time(except NVR).

10. How to adjust the sensitivity of motion detection

You can adjust the sensitivity of motion detection on SriHome mobile App.

Login SriHome App, tap Setting button >> “Settings” >> “Alarm setting”

The higher digit the sensitivity, the camera will be more easily alarmed.  “100” is the maximum sensitivity.

11.How to change the resolution of recording

Open Settings>Open Recording Settings>Click Recording>Select HD Recording Type