Please follow the instruction in the manual to set up wifi.

After you input your wifi’s and click next, it means the is connected to wifi successfully if you hear the voice “connect successfully” and the camera’s serial number will appear.

If not, please try the methods below.

1. Please notice if the camera gets power. If not, change another .

If it powers on, you can hear a voice “Welcome to use”;

If it is a , the camera will rotate by itself when it powers on.

2. They are matched by sound. Please make sure the environment is quiet and your phone’s volume is enabled.

3. Please try another phone if you have any.

Try another APP named “Net Cam” or “Cam360”

4. Please press and hold the button on the camera for 30 seconds when the camera gets the power to reset the camera to have a try.

5. Make sure your wifi has a password.

6. Please make sure the phone is not connected to the 5GHz wifi because the camera cannot connect HZ wifi.

7. If there is a special character like @#% in your wifi SSID and password, please delete the special character to have a try.

8 Please go to your router’s page try to change the encryption mode of wifi to other modes on the list such as WPA, WPA2, WEP, and so on. Please try all encryption modes.

9. If you can, use your phone to connect another wifi to see if the camera can connect another wifi.