XVR NVR DVR Two Way Talk Setup
Description
This section will show how to setup / use Two Way Talk function with Dahua devices.
Testing
- N42B2P-992108_DH_NVR4XXX-4KS2_MultiLang_V4.000.0000001.4.R.191129
- Audio input and output can only be used for 2-Way Talk on N42B2P, No Audio Recording
Computer Audio Setup Prerequisite (WebUI, SmartPSS and DSS Express)
-
Typical Computer Audio Interface (inputs/Outputs)
-
Microphone plugged into Microphone input (red) Speaker plugged into Output (green)
-
Both Microphone and speaker plugged into computer
Instructions
SystemUI Old
Prerequisites
- Dahua device that supports 2 Way Talk
- Microphone connected to Audio Input
- Speaker connected to Audio Output
Video Instructions
Step by Step Instructions
1. From Live View
2. Hover the mouse cursor near the top of the screen until the bar appears
3. Click the Microphone icon to begin Two Way Talk
4. The icon will highlight when Two Way Talk is active
5. Click the icon again to end Two Way Talk
SystemUI New
Prerequisites
- Dahua device that supports 2 Way Talk
- Microphone connected to Audio Input
- Speaker connected to Audio Output
Video Instructions
Step by Step Instructions
1. From Live View
2. Hover the mouse cursor near the top of the screen until the bar appears
3. Click the Microphone icon to begin Two Way Talk
4. The icon will highlight when Two Way Talk is active
5. Click the icon again to end Two Way Talk
WebUI Old
Prerequisites
- Dahua device that supports 2 Way Talk
- Speaker connected to Audio Output
- PC Audio connected – Headphones and Microphone
-
Standard Audio ports on PC
-
Red (Microphone) Green (Speakers/Headset)
-
Microphone and headset plugged in to PC
Video Instructions
Step by Step Instructions
1. Enter the IP of the device into a browser
At the Web Login
Enter the Username and Password
Click Login
2. Click to load the camera/channel from the Channel list on the left side of the screen
3. Click Start Talk to begin Two Way Talk
4. The button will remain highlighted while active
5. Click End Talk to stop Two Way Talk
WebUI New
Prerequisites
- Dahua device that supports 2 Way Talk
- Speaker connected to Audio Output
- PC Audio connected – Headphones and Microphone
-
Standard Audio ports on PC
-
Red (Microphone) Green (Speakers/Headset)
-
Microphone and headset plugged in to PC
Video Instructions
Step by Step Instructions
1. Enter the IP of the device into a browser
At the Web Login
Enter the Username and Password
Click Login
2. Click to load the camera/channel from the Channel list on the left side of the screen
3. On the bar above the channel/camera, click the Audio Talk icon (microphone) to begin Two Way Talk
4. The icon will remain highlighted while Two Way Talk is active
5. Click the icon again to end Two Way Talk
SmartPSS
Prerequisites
- Dahua device that supports 2 Way Talk
- SmartPSS
- Device added to SmartPSS
- Speaker connected to Audio Output
- PC Audio connected – Headphones and Microphone
-
Standard Audio ports on PC
-
Red (Microphone) Green (Speakers/Headset)
-
Microphone and headset plugged in to PC
Video Instructions
Step by Step Instructions
1. From the Main Menu of SmartPSS
Click Live View
2. Use the device tree on the left to load the channel/camera by dragging and dropping or double clicking
3. On the bar above the channel/camera, click the Audio Talk icon (microphone) to begin Two Way Talk
4. The icon will remain highlighted while Two Way Talk is active
5. Click the icon again to end Two Way Talk
DSS Express
Prerequisites
- Dahua device that supports 2 Way Talk
- DSS Express
- Device added to DSS Express
- Speaker connected to Audio Output
- PC Audio connected – Headphones and Microphone
-
Standard Audio ports on PC
-
Red (Microphone) Green (Speakers/Headset)
-
Microphone and headset plugged in to PC
Video Instructions
Step by Step Instructions
1.
Mobile:iDMSS Plus & gDMSS Plus
Description
Prerequisites
Video Instructions
Step by Step Instructions
1. Two Way talk is done through the Live View of the device
From the main screen of the app
Select Live
2. Tap the + icon
3. Select the Device / Channel from the list
4. The device will connect and display Live View
Long press the microphone icon (for approximately 3 seconds)
The Voice Call window will appear
Tap to select which device in the list you wish to begin Two Way Talk with
The device will start to connect
5. Two Way talk has now started.
The microphone icon will remain highlighted while Two Way Talk is in use
6. Tap the icon again to end Two Way Talk
It was a great sharing
I really love you
It really worked, I appreciate it!
I really love you
I can’t upload
It really worked, I appreciate it!